COMPARATIVE ANALYSIS OF DIRECT WASTE USING SOFTWARE CUTTING OPTIMIZATION PRO AND THE COST OF USING CONVENTIONAL REINFORCEMENT AND WIREMESH IN FLOOR SLAB WORK. (CASE STUDY: OFFICE AND DEPOT CONSTRUCTION PROJECT OF PT. GUDANG GARAM)

Fitri Nur Hidayah, Rafie Rafie, Safaruddin M. Nuh, Syahrudin Syahrudin, Lusiana Lusiana

Abstract


Rebar is one of the main materials in a building. The material has been widely innovated by product providers. In addition to using conventional reinforcement on the floor slab, it is now possible to replace the reinforcement with wire mesh reinforcement. Because material costs are a very large cost in construction projects, it is necessary to do proper material planning. This final project will compare the two reinforcements with the aim that project implementers can plan materials appropriately so that it is expected to minimize the huge cost expenditure. In this final project, the reinforcement in the floor slab work will be reviewed in terms of direct waste reinforcement which will be assisted by software cutting optimization pro and reinforcement costs using the AHSP stipulated by Permen PUPR No.1 of 2022. After various stages are carried out, a comparison of the direct waste level, direct waste cost, and cost of the two reinforcements will be obtained. A Comparison of the three reviews found that wire mesh reinforcement is more efficient than using conventional reinforcement.

Keywords


Conventional Reinforcement, Wiremesh Reinforcement, Direct Waste, Cutting Optimization Pro Software

Full Text:

PDF

References


Ahen, F., Nuh, S. M., & Indrayadi, M. (2021). “Analisis Perbandingan Biaya dan Waktu Metode Pelaksanaan Beton Cast In Situ Dengan Percast pada Pekerjaan Fondasi Tiang Pancang”. JeLAST: Jurnal PWK, Laut, Sipil, Tambang, 8(2), 1-8.

Kork, M., Hartono, W., & Sugiyarto, S. (2013). “Perhitungan Kebutuhan Tulangan Besi dengan Memperhitungkan Optimasi Waste Besi Pada Pekerjaan Balok dengan Program Microsoft Excel”. Matriks Teknik Sipil, 1(3), 290-295.

Mahapatni, I. A., & Juliana, I. K. (2022). Analisis Waste Level dan Waste Cost Bekisting dan Pembesian Pada Pekerjaan Struktur Proyek Konstruksi (Studi Kasus: Pembangunan Gedung SMPN 4 Sukawati). WIdya Teknik, 17(01), 74-82.

Muka, I. W., Widyatmika, M. A., & Antara, I. M. (2020). Analisis Perbandingan Waste Besi Tulangan Metode Konvensional Dengan Software Cutting Optimization Pro. Teknika, 15(2), 41-49.

Saputra, R. F. (2019). Analisis Biaya, Kekuatan dan Waktu Pekerjaan Pelat Lantai Tulangan Konvensional dan Tulangan Wiremesh. Universitas Islam Indonesia, 1-6.

Poon, C.S., Yu, A.T.W and Ng, L.H. (2001). On-Site Sorting of Construction and Demolition Waste in Hong Kong. Resource Conservation and Recycling, 32(2), 157-172.

Lampiran Peraturan Menteri Pekerjaan Umum Dan Perumahan Rakyat Nomor 1 Tahun 2022 Tentang Pedoman Penyusunan Perkiraan Biaya Pekerjaan Konstruksi Bidang Pekerjaan Umum dan Perumahan Rakyat.

[BSN] Badan Standarisasi Nasional. (2019). SNI 2847-1992. Persyaratan Beton Struktural Untuk Bangunan Gedung. Badan Standarisasi Nasional : Jakarta.

Yuan, F; Chen, Mengcheng; Pan, Jiniong. (2020). Flexural strengthening of reinforced concrete beams with high-strength steel wire and engineered cementitious composites. Construction and Building Materials 254:119284.




DOI: http://dx.doi.org/10.26418/jtst.v23i1.61193

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Jurnal TEKNIK-SIPIL

 

Jurnal Teknik Sipil Universitas Tanjungpura Indexed by :

http://www.mevjournal.com/mevfiles/indexers/04-ipi.png     

ISSN 1412-3576 (print), 2621-8429 (online)

Published by :

Department of Civil Engineering, Faculty of Engineering, Tanjungpura University

Jl. Profesor Doktor H. Hadari Nawawi, Bansir Laut, Pontianak Tenggara, Kota Pontianak Kalimantan Barat Indonesia 78124
Telp./Fax: +0561-740186
Email: jts@untan.ac.id

CP: 081256123030-085245045025

Visitor Counter: Jurnal Teknik Sipil

In its management and publication, this Civil Engineering Journal collaborates with:

1. Masyarakat Hidrologi Indonesia

2. Forum Studi Transportasi Antar Perguruan Tinggi (FSTPT)

 












 

 

 

 

 

 

  MAPS: