STUDY OF OCCUPATIONAL SAFETY AND HEALTH ON BLASTING PROCESS IN ANDESITE STONE MINING AREA WITH HIRAC METHOD IN CV. ARTHA AGUNG BERSAMA, HULU GURUNG SUB-DISTRICT, KAPUAS HULU REGENCY

Abraham Prasetio, Hendri Sutrisno, Wahdania Mukhtar, Fitriana Meilasari, Syahrudin Syahrudin

Abstract


CV. Artha Agung Bersama is an andesite mining company that uses a blasting system. This mining activity can harm workers if they do not apply good K3 management in blasting activities. One of the hazards of blasting activity is flying rock. For this reason, it is necessary to identify potential hazards, assess the level of accident risk, and recommend risk control efforts. The method in this study is the HIRAC (hazard identification risk assessment and control) method. This activity has five potential hazards: broken drum straps, worker negligence, explosive sounds, fly rock, and workers walking in a hurry in locations with a lot of gravel. There are five risks of accidents from potential hazards: being hit by a drum, scratched hands, pinched fingers forming a critical cover, slipping, exposure to diesel fuel, hearing loss, and being hit by a rock. Of the five hazard risks, three risks are included in the priority one category, namely: scratched hands, pinched fingers forming key covers, slipping, exposure to diesel fuel, and being hit by rocks. One risk is included in priority category three: being hit by a drum. One risk category is very high, namely being hit by a rock. The recommended risk control hierarchy for blasting activities is engineering control, administration, and personal protective equipment.

Keywords


Blasting, Occupational Safety, and Health

Full Text:

PDF

References


Asrun, A., Zamrud, L, M. and Sudayasa, I.P. (2013) ‘Faktor-Faktor Risiko yang Berhubungan dengan Kejadian Gangguan Pendengaran pada Karyawan Tambang’, Medula:Jurnal Ilmiah Fakultas Kedokteran Universitas Haluoleo, 1(1), pp. 14–19. doi:http://dx.doi.org/10.46496/medula.v1i1.183.

Ardyanti, R., Nirmala, A., dan Meilasari, F. (2020). ‘Identifikasi Bahaya Dan Risiko Menggunakan Metode Hirac Pada Aktivitas Tambang Bauksit Di Pt Aneka Tambang Tbk Tayan Hilir’, JELAST:, Vol 7 (2). http://dx.doi.org/10.26418/jelast.v7i2.42488

Budiarto., dan Cahyadi, T, A., (2011) ‘Peranan Keselamatan Dan Kesehatan Kerja (K3) Dalam Kegiatan Peledakan Mineral Dan Batubara’ Proceeding Industrial Engineering Conference 2011

Ghaisani, H, Dan Nawawinetu, E. D., (2014) “Identifikasi Bahaya, Penilaian Risiko Dan Pengendalian Risiko Pada Proses Blasting Di Pt Cibaliung Sumberdaya, Banten”, Jurnal Keselamatan dan Kesehatan Kerja Indonesia, vol. 3 (1).

Gultom, G., dan Hamza. (2015). ‘Aplikasi Berbasis Android Untuk Penentuan Jarak Aman Ledak Pada Teknik Peledakan Pertambangan Aplikasi Berbasis Android Untuk Penentuan Jarak Aman Ledak Pada Teknik Peledakan Pertambangan’ Universitas Veteran Yogyakarta.

Herwandi, M. G., Syahrudin., Syafrianto, M. K. 2020. ‘Identifikasi Potensi Bahaya K3 Dan Pengendalian Risiko Terhadap Pekerjaan Pada Kegiatan Pembongkaran (Pengeboran Dan Peledakan) Di Pt. Sulenco Wibawa Perkasa Desa Peniraman, Kecamatan Sungai Pinyuh, Kabupaten Mempawah, Provinsi Kalimantan Barat’ JELAST:, Vol 7 (1). http://dx.doi.org/10.26418/jelast.v7i1.40214

Kelvin, M., Purwoko, B., Syafrianto, M. K. (2020). ‘Analisis Potensi Bahaya Dan Pengendalian Risiko Pertambangan Batu Pada Tahap Muat Angkut Dan Dumping Di Pt. Sulenco Wibawa Perkasa Kabupaten Mempawah ‘JELAST:, Vol 7 (1). http://dx.doi.org/10.26418/jelast.v7i1.40306.

Nata, R.A., Syahmer, V. and Handayani, R. (2022) ‘Analisis Pemetaan Sebaran Kebisingan Dan Kelembaban Pada Penambangan Batu Andesit Di PT. Bintang Sumatra Pasifik Pangkalan Koto Baru’, Jurnal GEOSAPTA, 8(1), p. 7. doi:10.20527/jg.v8i1.10384.

OHSAS 18001. (2007). occupational health and safety management system requirements. Jakarta.

RKAB CV. Artha Agung Bersama Tahun 2021

Ramli, S., 2010. Manajemen Risiko dalam Perspektif K3 OHS Risk Management, Jakarta: Dian Rakyat.

Ramadhan, F. 2017 “Analisis Kesehatan dan Keselamatan Kerja (K3) Menggunakan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC)” Jurusan Teknik Industri, Fakultas Teknik, Universitas Serang Raya, ISSN: 978-602- 73672-1-0

Tarwaka. 2008. Kesehatan dan Keselamatan Kerja Manajemen dan Implementasi K3 di Tempat Kerja. Surakarta : HARAPAN PRESS

Triswandana, I. W. G. E., dan Armaeni, N. K. 2020 “ Penilaian Risiko K3 Konstruksi Dengan Metode Hirarc” Fakultas Teknik dan Perencanaan Universitas Warmadewa, Jurnal Universitas Kadiri Riset Teknik Sipil, ISSN 2502 – 9304 Ukarst Vol. 4 No. 1

Wijaya, A., Panjaitan, W.S. & Palit, H.C. 2015. ‘Evaluasi Kesehatan dan Keselamatan Kerja dengan Metode HIRARC pada PT. Charoen Pokphand Indonesia’. Jurnal Tirta. Vol. 3. No. (1).




DOI: https://doi.org/10.26418/jtst.v23i1.57216

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Jurnal TEKNIK-SIPIL

 Jurnal Teknik Sipil Universitas Tanjungpura Indexed by :

 

ISSN 1412-3576 (print), 2621-8429 (online)

Published by :

Department of Civil Engineering, Faculty of Engineering, Tanjungpura University

Jl. Profesor Doktor H. Hadari Nawawi, Bansir Laut, Pontianak Tenggara, Kota Pontianak Kalimantan Barat Indonesia 78124
Telp./Fax: +0561-740186
Email: jts@untan.ac.id

CP: 081256123030-085245045025

Visitor Counter: Jurnal Teknik Sipil

In its management and publication, this Civil Engineering Journal collaborates with:

1. Masyarakat Hidrologi Indonesia

2. Forum Studi Transportasi Antar Perguruan Tinggi (FSTPT)

 







 

 

 

 

 

 

  MAPS: