DESIGN OF REINFORCED CONCRETE STRUCTURE WITH ORDINARY MOMENT FRAME IN LOW SEISMIC REGION (CASE STUDY: MIDRISE SHOPPING BUILDING IN SINGKAWANG CITY)

Yongga Zulshaec, Herwani Herwani, Muhammad Yusuf

Abstract


This paper focuses on the design of a reinforced concrete structure for an eight-story shopping building in Singkawang City, located in a low to moderate seismic area. The study integrates relevant design considerations in response to the region's seismic conditions. Through structural analysis, the building is categorized as seismic design category B due to moderate seismic risk, leading to the selection of an ordinary moment-resisting frame system compliant with SNI 1726:2019. Emphasis is placed on the importance of using such a system to enhance ductility and prevent brittleness during earthquakes.

The research emphasizes the need to design structures capable of withstanding various loads, including dead, superimposed dead, live, wind, and earthquake loads, particularly in West Kalimantan, known for its historically low to moderate seismic activity. Recent earthquake records highlight the necessity of earthquake-resistant design for safety and durability. Structural analysis confirms the building's stability against seismic forces, with a modal participation ratio meeting SNI 1726:2019 requirements, indicating robust response under seismic loads.

The study also assesses inter-story drift and P-Delta effects to ensure they meet allowable limits, which is crucial for preserving structural integrity and preventing post-earthquake instability. A detailed reinforcement design following SNI 2847:2019 enhances structural strength and durability, especially when under seismic loading. The foundation design uses tailored hollow spun piles to provide sufficient bearing capacity and stability. This approach demonstrates resilience against potential seismic events in low-to-moderate seismic regions, highlighting the importance of integrating seismic design principles and ductility considerations for effective earthquake hazard mitigation.


Keywords


Seismic Design Category B, Ordinary Moment-Resisting Frame (MRF) System, West Kalimantan Seismicity, Structural Analysis and Design, Hollow Spun Piles

Full Text:

PDF

References


Adebar, P., & Zhou, L. (1996). Design of Deep Pile Caps by Strut-and-Tie Models. ACI Structural Journal, 93(4), 437–448. https://doi.org/10.1590/s1983-41952019000400007

Amin, U. M. K., Yusuf, M., & Elvira, E. Design Of Earthquake-Resistant Reinforced Concrete Structure of An Eight-Storey Flats in Pontianak City. Jurnal Teknik Sipil, 23(4), 1-9.

Applied Technology Council. (2017). Recommended Simplified Provisions for Seismic Design Category B Buildings (FEMA P-1091). California.

ASCE/SEI, 7-16. (2017). Minimum Design Loads and Associated Criteria for Buildings and Other Structures. ASCE

Aulia, D. hesti, Widayanto, E., & Wiswamitra, K. A. (2023). Analisis Kinerja Struktur Gedung Bertingkat Menggunakan Sistem Rangka Pemikul Momen Khusus (SRPMK) pada Pembangunan Rumah Susun Cakung Jakarta Timur. Rekayasa Sipil, 17(3), 243–248. https://doi.org/10.21776/ub.rekayasasipil.2023.017.03.2.

Concrete Reinforcing Steel Institute (CRSI). (2020). Design Guide on the ACI 318 Building Code Requirements for Structural Concrete. American Concrete Institute, 1–998.

Deshmukh, P., & Banarase, M. A. (2017). Effects of Staircase on the Seismic Performance of RCC Frame Building. International Journal of Advance Engineering and Research Development, 4(4), 1000–1018.

El Zareef, M. A., & El Madawy, M. E. (2018). Effect of Glass-Fiber Rods on the Ductile Behaviour of Reinforced Concrete Beams. Alexandria Engineering Journal, 57(4), 4071–4079. https://doi.org/10.1016/j.aej.2018.03.012.

Garcia, luis E., & Sozen, M. A. (2004). Chapter 14 Earthquake Resistant Design of Reinforced Concrete Buildings. In Earthquake Engineering from Engineering Seismology to Performance-Based Engineering Edited by Yousef Bozorgnia and Vitelmo V.Bertero. CRC Press

Gustafson, A. K. (2023). Non-Linear Pushover Analysis of Ordinary Moment Resisting Frame Structures in Australia. November, 23–2.

Han, S. W., & Lee, C. seok. (2020). Cyclic Behavior of RC OMF Beam-Corner Column Joints Under Unidirectional and Bidirectional Loadings, Engineering Structures. Engineering Structures, 224. https://doi.org/https://doi.org/10.1016/j.engstruct.2020.111304.

Haque, M. (2016). Seismic Performance Analysis of RCC Multi-Storied Buildings with Plan Irregularity. American Journal of Civil Engineering, 4(3), 68. https://doi.org/10.11648/j.ajce.20160403.11

Imran, I., Siringoringo, D. M., & Michael, J. (2021). Seismic Performance of Reinforced Concrete Buildings with Double Concave Friction Pendulum Base Isolation System: Case Study of Design by Indonesian Code. Structures, pp. 34, 462–478. https://doi.org/10.1016/j.istruc.2021.07.084.

Irawan, C., Djamaluddin, R., Raka, I. G. P., Faimun, Suprobo, P., & Gambiro. (2020). The Effect of the Presence of Infilling Concrete on Flexural Performance of Spun Pile – An Experimental Study. Jurnal Teknologi, 82(1), 85–94. https://doi.org/10.11113/jt.v82.11974

Irsyam, M., Cummins, P. R., Asrurifak, M., Faizal, L., Natawidjaja, D. H., Widiyantoro, S., Meilano, I., Triyoso, W., Rudiyanto, A., Hidayati, S., Ridwan, M., Hanifa, N. R., & Syahbana, A. J. (2020). Development of the 2017 National Seismic Hazard Maps of Indonesia. Earthquake Spectra, 36(1_suppl), 112–136. https://doi.org/10.1177/8755293020951206.

Kha, A. A. (2018). An Appraisal of the Tectonic Evolution of SW Borneo Constraints from Petrotectonic Assemblage and Gravity Anomaly. Bulletin of the Geological Society of Malaysia, 66(February), pp. 47–56. https://doi.org/10.7186/bgsm66201807.

Li, M., & Sasani, M. (2015). Integrity and Progressive Collapse Resistance of RC Structures with Ordinary and Special Moment Frames. Engineering Structures, 95, 71–79. https://doi.org/10.1016/J.ENGSTRUCT.2015.03.050

Ling, J. H., Lim, Y. T., & Jusli, E. (2023). Methods to Determine Ductility of Structural Members: A Review. Journal of the Civil Engineering Forum, 9(May), 181–194. https://doi.org/10.22146/jcef.6631.

Nugroho, W. O., Sagara, A., & Imran, I. (2022). The Evolution of Indonesian Seismic and Concrete Building Codes: From the Past to the Present. Structures, 41(December 2021), 1092–1108. https://doi.org/10.1016/j.istruc.2022.05.032

Partono, W., Irsyam, M., Nazir, R., Asrurifak, M., Kistiani, F., & Sari, U. C. (2019). Pengembangan Peta Percepatan Gerakan Tanah Puncak Kota Semarang berdasarkan Peraturan Gempa Tahun 2019. Media Komunikasi Teknik Sipil, 27(2), 203–212.

Paulay, T., & Priestley, M. J. N. (1992). Seismic Design of Reinforced Concrete and Masonry Buildings. In John Wiley & Sons, Inc. (Issue 4). John Wiley & Sons, Inc. https://doi.org/10.5459/bnzsee.25.4.362.

Rahmanto, F., Elvira, E., & Supriyadi, A. The Calculation Of The Building Structure Of Institut Teknologi Dan Bisnis Sabda Setia Kota Pontianak. Jurnal Teknik Sipil, 23(1), 1-14.

Ramin, K., & Mehrabpour, F. (2014). Study of Short Column Behavior Originated from the Level Difference on Sloping Lots during Earthquake (Special Case: Reinforced Concrete Buildings). Open Journal of Civil Engineering, 04(01), 23–34. https://doi.org/10.4236/ojce.2014.41003

Sayyed, O., Kushwah, S. S., & Rawat, A. (2017). Seismic Analysis of Vertical Irregular RC Building with Stiffness and Setback Irregularities. IOSR Journal of Mechanical and Civil Engineering, 14(01), 40–45. https://doi.org/10.9790/1684-1401064045.

Sutiono, T., Budi, G. S., & Herwani, H. (2023). Calculating Earthquake Resistant Structure of Medical Center Building Rumah Sakit Umum Daerah (RSUD) Soedarso Pontianak Using Pushover Analysis. Jurnal Teknik Sipil, 23(3), 337–349. https://doi.org/10.26418/jts.v23i3.67754.

Syahbana, A. J., Iqbal, P., Irsyam, M., Asrurifak, M., & Hendriyawan, H. (2021). Smoothed Gridded Seismicity Effect for Land-Use Development, Case Study: Kalimantan Island, Indonesia. Rudarsko-geološko-naftni zbornik, 36(3).

Taranath, B. S. (2010). Reinforced Concrete Design of Tall Buildings. Taylor and Francis Group, LLC.

Wilson, J. L., Lam, N. T. K., & Gad, E. F. (2015). Hazard Identification and Behaviour of Reinforced Concrete Framed Buildings in Regions of Lower Seismicity. Proceedings of the 10th Pacific Conference on Earthquake Engineering, 212, 6–8




DOI: https://doi.org/10.26418/jts.v24i1.75755

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Teknik Sipil

 Jurnal Teknik Sipil Universitas Tanjungpura Indexed by :

 

ISSN 1412-3576 (print), 2621-8429 (online)

Published by :

Department of Civil Engineering, Faculty of Engineering, Tanjungpura University

Jl. Profesor Doktor H. Hadari Nawawi, Bansir Laut, Pontianak Tenggara, Kota Pontianak Kalimantan Barat Indonesia 78124
Telp./Fax: +0561-740186
Email: jts@untan.ac.id

CP: 081256123030-085245045025

Visitor Counter: Jurnal Teknik Sipil

In its management and publication, this Civil Engineering Journal collaborates with:

1. Masyarakat Hidrologi Indonesia

2. Forum Studi Transportasi Antar Perguruan Tinggi (FSTPT)

 







 

 

 

 

 

 

  MAPS: