Analisa Partikulat Debu, SO Dan NO2 Pada Industri Manufaktur Di Surabaya

Yudha Eka Putra Suwanto, Maritha Nilam Kusuma

Abstract


This study aims to determine how much dust, SO2 and NO2 concentrations are in the air and to know the description of the distribution of air in the study site. In addition, this research also aims to design air pollution control devices that can be used to control the emissions produced. The method in this research uses the Gausse method in modeling and uses AERMOD software and Google Earth to complete the model description. It is known that the farthest distance the highest concentration of dust spread is 0.071 km with a dust concentration of 101.3 µg/m3. The farthest distance the highest concentration of SO2 spread was at a distance of 0.051 km with a value of SO2 concentration of 6753.3 µg/m3. The farthest distance the highest concentration of NO2 spread was at a distance of 0.051 km with a value of NO2 concentration of 91.45 µg/m3. The air controller uses a bag filter with 6 compartments for dust control and uses silica absorbent and activated charcoal for controlling NO2 and the Flue-Gas Desulfurization (FGD) method for SO2.


Keywords


dust, SO2, NO2, manufacturing industry

Full Text:

PDF

References


Amanullah, A. A., Rahmata, Y., Kurniawan, D. C., Taufikri, Andika, R. N., Ilham, R., Febialismanriva, R., & Inggriani, I. (2019). Karakteristik Emisi Industri Pulp dan Kertas PT . Riau Andalan Pulp Lestari dalam Konteks Pencemaran Udara. Jurnal Kapita Selekta Geografi, 2(6), 24–31.

Hamid, S. A., Muralia, H., Rusdiana, Z., & Ika, R. R. (2018). Aplikasi Model AERMOD dalam Memprediksi Sebaran Emisi Cerobong Asap PLTD Tello, Makassar. Prosiding Seminar Ilmiah Nasional Sains Dan Teknologi, 4, 461–468.

Kartikasari, D. (2020). Analisis Faktor-Faktor Yang Mempengaruhi Level Polusi Udara Dengan Metode Regresi Logistik Biner. MATHunesa: Jurnal Ilmiah Matematika, 8(1), 55–59.

Natsir, T. A., Windrianto P, Y., Susetyaningsih,R., Setyanto, K., & Dewi, R. (2018).Simulasi Dampak Pencemaran UdaraKarbon Monoksida Di Kota YogyakartaAkibat Emisis Kendaraan Bermotor.Jurnal Manusia Dan Lingkungan, 24(1),11.

Purwanta, W. (2018). Pemenuhan Baku Mutu Udara Emisi Dan Penanganannya Tinjauan Atas Polutan Partikulat, NOx, dan SO2. Prosiding Seminar Nasional Dan Konsultasi Teknologi Lingkungan, 5(September), 32–41.

Rahmadhani, A. (2017). Pemodelan dispersi pencemaran udara sumber majemuk industri semen di kabupaten tuban jawa timur. 163.

Rizqi, mukhlis nur. (2021). Tugas Akhir Pengendalian Pencemaran Gas Co Dan So 2 Oleh Tumbuhan Dari Aktivitas Transportasi Di Jalan. Politeknik Perkapalan Negeri Surabaya Surabaya.

Sasmita, A., Andrio, D., & Hasibuan, P. (2019). Pemetaan Sebaran Partikulat Dari Pembakaran Limbah Padat Industri Pengolahan Sawit, Di Kabupaten Kampar, Riau. Jurnal Sains Dan Teknologi, 18(2), 57–67.

Sasmita, A., Andrio, D., & Nopita, R. (2021). UAP TEMBILAHAN , RIAU. Jurnal Envirotek, 13(2).

Sukmanto, B. T. (2020). Persepsi Kebutuhan Karakter Kerja Industri Bagi Tenaga Kerja Bekerja Di Industri Manufaktur Kabupaten Cirebon. International Journal of Hypertension, 1(1), 1–171.




DOI: http://dx.doi.org/10.26418/jtllb.v11i3.68558

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Karya ini dilisensikan di bawah Creative Commons Attribution-ShareAlike 4.0 International License.