Deteksi Osilasi Masalah Penalaan Pengendali secara Real-time dengan Metode Deteksi Puncak Spektrum

Boby Aoliya Permana, Awang Noor Indra Wardana

Abstract


In process industry, most control loops suffer with disturbances indicated by existing oscillations. One of the major problems of the oscillation is controller tuning problem. Peak spectral detection method which is classic and simple way is proposed as technique for detecting oscillation. Nevertheless, the utilization and performance of peak spectral detection on process oscillation detection still cannot be found. This study develops the utilization and performance of peak spectral detection method. It implemented based on IEC 61499. To evaluate the method, test data are used to set the lag value in peak spectral detection method and industrial data for obtaining performance of peak spectral detection method. With fast Fourier transform length 512 points and lag value 180 points, the developed peak spectral detection method detected two oscillations of three different oscillating signals at 461 s and 441 s.

Keywords


control loop, oscillation, detection, controler tuning problem, peak spectral detection method

Full Text:

PDF

References


N. F. Thornhill dan A. Horch, ”Advances and New Directions in Plant-Wide Disturbance Detection and Diagnosis,” Control Engineering Practice, vol. 15, hal. 1196-1206, 2007.

J. W. V. Dambros, J. O. Trierweiler, dan M. Farenzena, “Oscillation detection in process industries – Part I: Review of the detection methods,” Journal of Process Control, vol. 78, hal. 108-123, 2019.

M. Jelali dan B. Huang, “Detection of Oscillating Control Loops,” in Detection and Diagnosis of Stiction in Control Loop: State of the Art and Advanced Methods, London, Springer, 2010, hal. 81-94, 2010.

K. Ghosh, U. Nallasivam, dan N. Kubal, “A Method for Automatic Detection of Controller Tuning Issues,” IFAC Papers Online, vol. 48, hal. 765-770, 2015.

J. Babuska, J. van Ast, dan S. Mesic, “A fuzzy-logic system for detecting oscillations in control loops,” IEEE on International Conference on Fuzzy System, , 2006.

K. Zhang, B. Huang, dan G. Ji, “Multiple oscillations detection in control loops by using DFT and Raleigh distribution,” IFAC Papers Online, vol. 48, hal. 529-534, 2015.

T. Hagglund, “Automatic detection of sluggish control loops,” Control Engineering Practice, vol. 7, hal. 1505-1511, 1999.

P. Kuehl dan A. Horch, “Detection of sluggish control loops – Experiences and improvements,” Control Engineering Practice, vol. 13, hal. 1019-1025, 2005.

A. V. Oppenheim dan R. W. Schafer, Discrete-Time Signal Processing, Upper Saddle River: Pearson, 2015.

V. Vyatkin,. "The IEC 61499 standard and its semantics." IEEE Industrial Electronics Magazine, vol. 3, no. 4 hal 40-48, 2009.

J. H. Christensen, "IEC 61499 architecture, engineering methodologies and software tools." International Conference on Information Technology for Balanced Automation Systems, 2002

B. A. Permana, A. N. I. Wardana, N. Effendy, “Implementation of Event-Driven Fast Fourier Transform based on IEC 61499,” 2019 International Conference on Science and Technology, 2019.

A. Zoitl, T. Strasser, dan A. Valentini, “Open source initiatives as basis for the establishment of new technologies in industrial automation: 4DIAC a case study”. 2010 IEEE International Symposium on Industrial Electronics. 2010

T. Strasser, M. Rooker, G. Ebenhofer, A. Zoitl, C. Sunder, A. Valentini, dan A. Martel, “Framework for distributed industrial automation and control (4DIAC)”. 6th IEEE International Conference on Industrial Informatics, hal. 283-288. 2008

A. N. I. Wardana, “A Method for Detecting the Oscillation in Control Loops based on Variational Mode Decomposition“, 2015 International Conference on Computer, Control, Informatics and Its Applications, 2015.

G.R.R.. Dewa, A.N. I.Wardana, S. Hawibowo, “ Linear Oscillation Diagnosis of Process Variable in Control Loop Based on Variational Mode Decomposition”, 2018 International Conference on Science and Technology, 2018.




DOI: http://dx.doi.org/10.26418/elkha.v11i2.34940

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 ELKHA : Jurnal Teknik Elektro

Editorial Office/Publisher Address:
Editor Jurnal Elkha, Department of Electrical Engineering, Faculty of Engineering, Universitas Tanjungpura,
Jl. Prof. Dr. Hadari Nawawi, Pontianak 78124, Indonesia

website : http://jurnal.untan.ac.id/index.php/Elkha
email : [email protected]

ORCID iD : https://orcid.org/0000-0002-0779-1277

Assiciated with :

    MoU/IA   ELKHA - FORTEI

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.